Stationary Type Conveyourised Semi Automatic Block Making Machine with Dwon Conveyor Model No. SF 1080 MCH

This machine is specially made with Hopper with Feeder and has the following functions:

The machine will work as:

First of all, we mix the raw material like cement, grid, sand and it will flow to the conveyor. Through the conveyor, it will come to the hopper and from the hopper, it will fill to the mould and functioning the push button initially, the vibrator will scart setting the material properly and again the feeder will level up and then hydraulic will work 3 to 4 times and it will be ready for taking our the blocks. The entire process willl take about 45 to 50 sec. The block is ready and it will come to the down conveyor and then can take the block by hand or by forklift etc...

(Mixer Machine 3 HP 17 ft Conveyor Gear Box attached 2 HP Motor Hydraulic - 5 HP - 1440 RPM and 2 Nos. for Double Vibrator each 1.5 HP - 2280 RPM and 1 No. 1 HP for Gear Box Drive - 1440 RPM for down conveyor system total 14 HP)

Size of Mould                                Block per Stoke/hr.

400 x 200 x 100 mm 10 Nos.        600 Nos. per hr. - 4800 per day of 8 hrs.

400 x 200 x 150 mm 06 Nos.        360 Nos. per hr. - 2880 per day of 8 hrs.

400 x 200 x 200 mm 06 Nos.        360 Nos. per hr. - 2880 per day of 8 hrs.

This Machine can make normal wall blocks, either hollow or solid and also paver kerb stone, rancy blocks etc...